Metal Jacket™ - Case of 12 aerosols

Metal Parts Protector

Item #125747-12

Metal Jacket™ - Case of 12 aerosols

Metal Parts Protector

Item #125747-12

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Non-sticky translucent protective coating
Protects against flash rust and corrosion
Coated parts can be welded and painted and stacked

Product Description

Metal Jacket™ is a flexible, weldable, metal parts protector. When applied, it will prevent rust and corrosion on all metal parts. Apply to machined parts, dies, pipe threads, casting, tools, jigs and stamped metal parts. Prevents corrosion due to salt spray on cables, hoists, pulleys, winches and riggings. Effective in protecting metal parts on boats, ships and dock equipment. Affords long term protection for indoor or outdoor storage.

USAGE
A two or three mil coating will provide indefinite protection for indoor storage and six months to one year protection for outdoor storage. A five or six mil coating will protect materials for up to two years in outdoor storage. Film is a transparent amber, easy to see through. Can be removed by washing with kerosene or mineral spirits. Once removed, parts can be painted.

AREAS OF USE
Wastewater/Water Plants – Highly corrosive conditions; Tools, Construction Parts, Equipment Parts

Public Works Dept. – Wet storage conditions; Construction Parts, Vehicle Parts

Tool and Die Shops – Wet conditions; Stored Machined Parts, Castings, Jigs, Molds

Boatyards – Wet conditions; Metal Dock Parts, Ship Parts

Manufacturing Plants – Wet storage conditions; Tear Down Equipment Storage, Jigs, Manufacturing Equipment Parts

Oil Companies/Refineries – Outdoor Conditions; Oil Rig Parts, tools kept at Rig Locations

Directions for Use

Product is most effective when parts are clean and free of rust, scale or dirt. However, product will afford adequate protection when applied over rust, scale and dirt, and will aid in removal later. Remove protective cap. Point opening in spray tip towards part to be coated. Holding can 8 to 10 inches from part, spray 2 or 3 mil coat with a slow sweeping motion. Completely wet surface. For extremely severe conditions, wait 5 minutes and apply another coat. A 2 or 3 mil coating will provide indefinite protection for indoor storage and 6 months to 1 year protection for outdoor storage. A 5 or 6 mil coating will protect materials for up to 2 years in outdoor storage. Product will completely set up in 2 hours. Once the film is hard, part can be handled. Dust and dirt can be wiped off without affecting film. Can be removed by washing with kerosene or mineral spirits. Once removed, parts can be painted.