GLV™ - Case of 12 aerosols

Instant Cold Galvanizing Compound

Item #121806-12

GLV™ - Case of 12 aerosols

Instant Cold Galvanizing Compound

Item #121806-12

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Coats new or old metals to protect against rust and corrosion
Dries quickly and sets extremely hard
Contains zinc for resistance to corrosion, abrasion, cracking and peeling

Product Description

GLV™ coats new or old metals with a zinc galvanizing coating that protects against rust and corrosion for years. GLV is an excellent primer for finishes on wood or metal.

ZINC RICH FORMULA
The high zinc content makes GLV resistant to abrasion, cracking or peeling, and offers unusual flexibility. Heavy zinc formulation fills small cracks and surface flaws.

STOPS RUST
Electrolytic effect stops rust. Highly resistant to corrosive atmospheres, water, acid and salt. Through galvanic action, small scratches “heal” themselves. In larger scratches, rust is limited to the actual area of the scratch. It cannot creep under the coating.

Directions for Use

Wire brush off any loose rust, or sandblast heavy rust or mill scale. Remove grease and oil from surface with a thinner or petroleum solvent. Remove old paint with paint remover and clean with thinner. For best results use between temperatures of 64 to 86°F (18 to 30°C.) This product is designed for use only in a well-ventilated area. Use only in areas where fumes from this product will not come in contact with food or food products. Shake the can vigorously for 60 seconds after the mixing ball is loose. Spray in even strokes from a distance of 10 to 12” (25 to 30 cm). Spray no closer than 10 to 12 inches from surface. Spray light coats with smooth sweeping motion to avoid runs and sags. Allow 5 to 10 minutes before handling. Drying may be accelerated by applying heat, blown hot air or baking oven. One coat will be satisfactory. A second coat may be applied at any time to maximize the protection. After use, turn aerosol can upside down and depress valve button for several seconds to clear valve and prevent clogging.